Position:Home > Products |
Introduction |
clear silicone sealant ,silicone adhesive ,Silicone sealant silicon
adhesive glue for electronic devices ,
HM-825
Application
1. Used as coated circuit board and the electron component.
2. Used as bonding and stationary seal and insulation for the electron and electrical parts. It has applications in a wide range of fields.
3. Widely used as potting bonding and sealing in electronic appliances
Properties
1.Monocomponent, dealcoholization, neutral cure sealant, low viscosity and low liquidity surge. No obvious objectionable odor when curing, simple operation.
2. Apply to electronic circuit board of coating and insulation, electrical structure of sealing and insulation. No corrosion to many material and electrical apparatus element.
3. Has excellent adhesion and ductility for most material. Especially for lime, white cement, the adhesion is better than other silicones.
4. Excellent weather ability and resistance for acid, alkali, salt, lubricating oil corrosion ability.
Parameter
color |
white |
viscosity(Mpa.S) |
25000-30000 |
Specific gravity |
1.0g/cm3 |
Durometer Shore A |
30 |
Tensile strength |
0.8Mpa |
Shear strength |
0.7Mpa |
Elongation at break |
150% |
Applicable temperature( C )) |
–50~+150 |
Breakdown voltage |
16kv/mm |
Volume resistivity |
5.1X1014Ω•CM |
Dielectric constant |
2.80(1MHz) |
Tack free time(min) |
8mins(20C,50% RH) |
Packaging
plastic bottles ,300ml per cartridge
Storage
Under -20C~27C shady and cool environment, 9 months from the date of manufacture
Remark
Completely cured sealant is non-toxic, but do not directly contact with eyes or kids. Should keep ventilate when applying. Meanwhile, the field application is diverse, we can not control the applying. We suggest that before applying, customer had better have a test to make sure our sealant can highly meet your demand.
plyii�opH�"�\; span>
Attention:
This article is published by reliable data we think, because of complicated situation, it is impossible for us to know all, we cannot guarantee that our products in some of the usage and application are correct and applicable. User should learn more about the product before using . And then decide the best way to use.
on�> foH�"�\; e of manufacture, keep in cool and dry place (-20℃~27℃).
Attention
Complete solidification product is innoxious. But keep out of children’s reach and avoid touching with eyes before solidifying, work in ventilated place. And due to work environment and condition is varying; we recommend that test product before using.
silicone cookware handle |
stainless steel cookware handle |
diecasting pan handle |
cookware handles for pan and pot |
cookware handle, cookware parts |
广东皓明有机硅材料有限公司 Tel:0086-757-82711390 Fax:0086-757-82711390 E-mail:marketing1@hm-sil.com Add:Lianhua Development Zone,Dinghu District,Zhaoqing City,Guangdong,China. |