(Working time:
9:00-18:00 GMT+8)

Hot line0086-757-82711390

Position:Home > Products > Property > Silicone sealant > Silicone rubber
RTV liquid silicone rubber RTV-800
Key:silicone rubber, RTV-2 mold making silicone, RTV liquid silicone rubber, sculpture molding
Characteristic: Silicone rubber, RTV-2 mold making silicone, RTV liquid silicone rubber, sculpture molding .low viscosity, easy to use ,low hardness, high strength ,suitable to used as brush material ,and mainly used to produce transparent poly-resin and elaborate artifact products ,with excellent perform…
Hotline:0086-757-82711390
        Introduction


Silicone rubber, RTV-2 mold making silicone, RTV liquid silicone rubber, sculpture molding



RTV-800

 

RTV-800 is two parts mould making material (A :silicone,major component B: hardner). This product is room temperature cure , with high softness and excellent mobility, tensile strength , tear resistance , etc.

 

Properties

low viscosity, easy to use ,low hardness, high strength ,suitable to used as brush material ,and mainly used to produce transparent poly-resin and elaborate artifact products ,with excellent performance .

Cure at room temperature , do not need insolation or extra heat

3. Good mechanical property , with high elasticity, softness, tensile strength and extensibility

4. Mainly used to produce Polyster , Epoxy products with moderate hardness, easy to demould , limited expansion ,high thermal stability ,the life span is longer than normal rubber .

 

Parameters

 

Before cure       RTV-800           hardner 800

appearance      mobile paste          liquid

color            milky white            transparent

viscosity        30 k~35k

 

after cure

7 days at room temperature

hardnessShore A           21°

tensile strength kg/cm2        >35

elongation  %                  >450

Tear resistance kg/cm          >24

Linear shrinkage %             0.35

 

Application instructions

 

Silicone rubber, RTV-2 mold making silicone, RTV liquid silicone rubber, sculpture molding

Pls thoroughly agitate part A before use

Ratio of  Part B and oil (15  30%)

 

Type

Ratio of oil

Ratio of part B

Operation time

Cure time

packet mode/ brush

0

2%

20 minutes

70 minutes

1.5%

30 minutes

90 minutes

Pls adjust ratio of hardner and oil according to specific condition, for example ,room temperature and moisture, etc .

Pls don’t add any oil due to low viscosity of this product .

 


Recommended
silicone cookware handle
stainless steel cookware handle
diecasting pan handle
cookware handles for pan and pot ​
cookware handle, cookware parts
Contact HOMEEN
广东皓明有机硅材料有限公司
Tel:0086-757-82711390
Fax:0086-757-82711390
E-mail:marketing1@hm-sil.com
Add:Lianhua Development Zone,Dinghu District,Zhaoqing City,Guangdong,China.