(Working time:
9:00-18:00 GMT+8)

Hot line0086-757-82711390

Position:Home > Products
silicone rubber RTV-524
Key:silicone rubber, RTV-2 mold making silicone, RTV liquid silicone rubber, sculpture molding
Characteristic: silicone rubber, RTV-2 mold making silicone, RTV liquid silicone rubber, sculpture molding .Mainly used to produce Polyster , Epoxy products with moderate hardness, easy to demould , limited expansion ,high thermal stability ,the life span is longer than normal rubber .
Hotline:0086-757-82711390
        Introduction

silicone rubber, RTV-2 mold making silicone, RTV liquid silicone rubber, sculpture molding



RTV-524

 

RTV-524 is two parts mould making material (A :silicone,major component B: hardner). This product is room temperature cure , with high softness and excellent mobility, tensile strength , tear resistance , etc.

 

Properties

low viscosity, easy to use ,low hardness, high strength ,suitable to used as packet mode material ,and mainly used to produce transparent poly-resin and elaborate artifact products ,with excellent performance .

Cure at room temperature , do not need insolation or extra heat

3. Good mechanical property , with high elasticity, softness, tensile strength and extensibility

4. Mainly used to produce Polyster , Epoxy products with moderate hardness, easy to demould , limited expansion ,high thermal stability ,the life span is longer than normal rubber .

 

Parameters

 

Before cure       RTV-524           hardner 524

appearance      mobile paste          liquid

color            milky white            transparent

viscosity        25 k~30k

 silicone rubber, RTV-2 mold making silicone, RTV liquid silicone rubber, sculpture molding

after cure

7 days at room temperature

hardnessShore A           17°±2

tensile strength kg/cm2        >35

elongation  %                  >500

Tear resistance kg/cm          >23

Linear shrinkage %             0.35

 

Application instructions

 

Pls thoroughly agitate part A before use

Ratio of  Part B and oil

 

Type

Ratio of oil

Ratio of part B

Operation time

Cure time

packet mode/ brush

0~10%

2%

15~20 minutes

60 minutes

1.5%

20~25 minutes

80 minutes

Pls adjust ratio of hardner and oil according to specific condition, for example ,room temperature and moisture, etc .



Recommended
silicone cookware handle
stainless steel cookware handle
diecasting pan handle
cookware handles for pan and pot ​
cookware handle, cookware parts
Contact HOMEEN
silicone bakeware,cookware parts and silicone sealant supplier
Tel:0086-757-82711390
Fax:0086-757-82711390
E-mail:marketing1@hm-sil.com
Add:Lianhua Development Zone,Dinghu District,Zhaoqing City,Guangdong,China.